TapHome KNX Gateway uses a KNX component from Weinzierl called BAOS. The gateway is in ETS listed under the Weinzierl name. BAOS is KNX certified.

...

Select BAOS module and switch to it its parameters. Choose first data point group 1-10, select data point 1 type. 

...

For data point which are only written from TapHome select Communication, Read, Transmit options:

Image Modified

4. Configure Group Addresses 

Switch to Group Addresses view and link BAOS data point to appropriate group:

Repeat the steps 3. and 4. for all data points which you want to be communicated to TapHome.

5. Download

Connect the KNX Gateway Board to the KNX bus and the PC to a KNX Interface. Press the Learn button on the KNX Gateway (green LED must light up). Select the device KNX BAOS 830 and use menu Download/Full download.