| Info |
|---|
Alarm Smart rule is intended for protection. It's capable to execute a sequence of actions if any of selected sensors triggers the alarm during Arm state. In order to use Alarm Smart rule you have to create Alarm virtual device first in Settings → Virtual Devices doc_tap_alarm_intro; |
To create Alarm Smart rule go to Alarm device and add new Smart rule. From the list of Smart rules choose Alarm. doc_tap_alarm_create;
Alarm Smart rule overview doc_tap_alarm_overview;
| Info |
|---|
Alarm device must be created in order to use Alarm Smart rule doc_tap_alarm_overview2; |
| Info |
|---|
Activate (trip) Alarm Selection of sensors as input triggers for Alarm doc_tap_alarm_activate; |
| Info |
|---|
Reactivation delay Period of time for reactivation of the alarm by the same sensor doc_tap_alarm_reactivdelay; |
| Info |
|---|
Alarm sequence Definition of steps executed sequentially in case of tripping the alarm doc_tap_alarm_sequence; |
| Info |
|---|
Arming Alarm Initial delay to prevent false alarm during arming Countdown sound enabling doc_tap_alarm_armingalarm; |
| Info |
|---|
Arming actions Actions to be performed during arming period doc_tap_alarm_armingactions; |
| Info |
|---|
Security Enable/Disable password protection of Arming/Disarming Set the password to be able to arm and disarm doc_tap_alarm_security; |
Alarm sequence section in detail doc_tap_alarm_sequencedetail;
| Info |
|---|
In order to disarm the alarm without tripping false alarm we recommend using Phase 1 of the alarm as “disarming” one. The main alarm action will start by Phase 2. doc_tap_alarm_sequencenot; |
Alarm Phase 1 settings example (disarming phase) doc_tap_alarm_phase1;
Alarm Phase 2 settings example (true alarm phase) doc_tap_alarm_phase2;
| Info |
|---|
Configuration example of this Smart rule is located on our Demo Account > Smart Rules Dashboard doc_tap_alarm_end; |