To create fully working thermostat you will need:
...
3. To create Virtual Thermostat, go to Settings → Virtual devices → Add device → Thermostat
|
|
|---|
4. Open Thermostat Service settings and define Air sensor (and a Floor Sensor as well for electric floor heating) enabled in Step 1.
...
5. Add Smart Rule Temperature hysteresis controller with following settings
- Mode = Heating fixed
- Medium = Hot (fixed (there are more options )
(Mode and Medium are explained here Heating and Cooling modes
...
)
- Range = oscillation range +/- value, default value 0.5 Degrees,
- Output device = Output actuator,
- Limit temperature + Limit temperature Sensor = usually floor temperature sensor with the limit temperature value
...