Page Comparison

	230/110 VAC light e.g. a light bulb	12/24 VDC Constant Voltage LED light e.g. a LED strip	DC Constant Current LED light e.g. a LED downlight	TapHome LED downlights
12 LED/OC Module	Image Modified	Image Modified	Image Modified	Image Modified
8 Dim Module	Image Modified	Image Modified	Image Modified	Image Modified
8 Dim Module + 230VAC Dimmable Constant Current Driver	Image Modified	Image Modified	Image Modified	Image Modified
4 AO Module + 230VAC Finder Universal Dimmer	Image Modified	Image Modified	Image Modified	Image Modified
Core 2.x	Image Modified	Image Modified	Image Modified	Image Modified
6 UI / 6 UC Bus Module	Image Added	Image Added	Image Added	Image Added
DMX Gateway + applicable driver	Image Modified	Image Modified	Image Modified	Image Modified
DALI Gateway + light with DALI ballast	Image Modified	Image Modified	Image Modified	Image Modified

All TapHome modules with dimming feature allow you to adjust minimum and maximum values for dimming range.

To set MIN/MAX vlaue of dimming range for 12 LEDOC/OC, Core 2.x and 6 UI / 6OC:

• Open Service Settings of selected Dimmer and set MIN/MAX settings in %

Image Added

 GUI of Dimmer in TapHome application stays as it was (0% to 100%) but the device recalculates it to range defined in Service Settings.

To set MIN/MAX vlaue of dimming range for 8 DIM or AO4:

• Open Service Settings of selected Dimmer and set MIN/MAX settings in Volts (decimal numbers supported)

Image Added

 GUI of Dimmer/Analog output in TapHome application stays as it was (0% to 100%) but the device recalculates it to range defined in Service Settings.

Detailed configuration