Page Comparison

...

doc_tap_InDe;

doc_tap_SmRu;

doc_tap_OuDe;

Thermostat

→ PID Controller →

P = 2
I = 0.2
D = 0

Overall Output

doc_tap_The;

doc_tap_PID0;

doc_tap_OOu;

doc_tap_Based_BoilerC;

...

doc_tap_1IDOO;	doc_tap_1SRE;	doc_tap_1ODB;
<1%	--	--	doc_tap_01;	doc_tap_001;
>1%	Equation: If Overall Output > 0.01 Minimum duration: 5min	TRUE: Turn on Boiler A FALSE: Turn off Boiler A
	doc_tap_1Eq001;	doc_tap_1TrFaBoA;
>45%	Equation: If Overall Output > 0.45 Minimum duration: 5min	TRUE: Turn on Boiler B FALSE: Turn off Boiler B
	doc_tap_1Eq045;	doc_tap_1TrFaBoB;
>90%	Equation: If Overall Output > 0.90 Minimum duration: 5min	TRUE: Turn on Boiler C FALSE: Turn off Boiler C
	doc_tap_1Eq090;	doc_tap_1TrFaBoC;

...

doc_tap_States_BoCAB;

doc_tap_SequencerABC;

docSequencer
Step 1: Priority A
(duration 18 hours)
Step 2: Priority B
(duration 18 hours)
Step 3: Priority C
(duration 18 hours)

Rotate sequenceBoiler Prioritydoc

Input device	→ Smart Rule →	Output device
Idoc_tap_InnDe;	doc_tap_SmmRu;	doc_tap_OuuDe;	Virtual push button to start the sequencer
doc_tap_Virtual_Push_butt;	doc_tap_SeqABC;	doc_tap_Rotseq;	doc_tap_BoPri;

doc_tap_smartrulesA;

...

doc_tap_2IDOO;	doc_tap_2SRE;	doc_tap_2ODB;	doc_tap_2LCond;
<1%--	--	doc_tap_02;	doc_tap_002;
>1%	Equation: If Overall Output > 0.01	TRUE: Turn on Boiler A FALSE: Turn off Boiler A	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority A
	doc_tap_2Eq01;	doc_tap_2TrFaBoA;	doc_tap_2MultiPriorA;
>45%	Equation: If Overall Output > 0.45	TRUE: Turn on Boiler B FALSE: Turn off Boiler B	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority A
	doc_tap_2Eq45;	doc_tap_2TrFaBoB;	doc_tap_2MultiPriorAA;
>90%	Equation: If Overall Output > 0.90	TRUE: Turn on Boiler C FALSE: Turn off Boiler C	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority A
	doc_tap_2Eq90;	doc_tap_2TrFaBoC;	doc_tap_2MultiPriorAAA;

...

doc_tap_SimilarLimitingBC;

...

Output device
• Boiler

doc_tap_3IDOO;	doc_tap_3SRE;	doc_tap_3ODB;	doc_tap_3LCond;
<1%	--	--	doc_tap_03;	doc_tap_003;
>1%	Equation: If Overall Output > 0.01	TRUE: Turn on Boiler B FALSE: Turn off Boiler B	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B
	doc_tap_3Eq01;	doc_tap_3TrFaBoB;	doc_tap_3MultiPriorB;
>45%	Equation: If Overall Output > 0.45	TRUE: Turn on Boiler C FALSE: Turn off Boiler C	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B
	doc_tap_3Eq45;	doc_tap_3TrFaBoC;	doc_tap_3MultiPriorBB;
>90%	Equation: If Overall Output > 0.90	TRUE: Turn on Boiler A FALSE: Turn off Boiler A	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B
	doc_tap_3Eq90;	doc_tap_3TrFaBoA;	doc_tap_3MultiPriorBBB;	Input device • Overall Output	→ Smart Rule → • Equation	Limiting Condition

doc_tap_4IDOO;	doc_tap_4SRE;	doc_tap_4ODB;	doc_tap_4LCond;
<1%	--	--	doc_tap_04;	doc_tap_004;
>1%	Equation: If Overall Output > 0.01	TRUE: Turn on Boiler C FALSE: Turn off Boiler C	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C
	doc_tap_4Eq01;	doc_tap_4TrFaBoC;	doc_tap_4MultiPriorC;
>45%	Equation: If Overall Output > 0.45	TRUE: Turn on Boiler A FALSE: Turn off Boiler A	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C
	doc_tap_4Eq45;	doc_tap_4TrFaBoA;	doc_tap_4MultiPriorCC;
>90%	Equation: If Overall Output > 0.90	TRUE: Turn on Boiler B FALSE: Turn off Boiler B	Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C
	doc_tap_4Eq90;	doc_tap_4TrFaBoB;	doc_tap_4MultiPriorCCC;

...

Versions Compared