Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

TapHome KNX Gateway uses a KNX component from Weinzierl called BAOS. The gateway is in ETS listed under the Weinzierl name. BAOS is KNX certified.

doc_tap_Knx_Gatew;

1. Import Product Database    doc_tap_

...

Prod_data;

Download product database from page https://www.weinzierl.de/images/download/development/830/Weinzierl_83x_KNX_BAOS_Module_ETS4.zip

...

Open ETS 5 → Catalogs → import Weinzierl product database from downloaded archive.

doc_tap_ets5;

2. Add BAOS module to your installation    doc_tap_

...

BAOS;

Change to Topology view in ETS project:  

...

From producer catalogue choose Weinzierl producer and find KNX BAOS 832 module. Insert module to appropriate area and line.

doc_tap_prod_cataloq;

3. Configure BAOS Data Points      doc_tap_

...

Conf_baos;

Select BAOS module and switch to its parameters. Choose first data point group 1-10, select data point 1 type. 

...

For data point which are only written from TapHome select Communication, Read, Transmit options:

doc_tap_data_bod;

Image Modified

4. Configure Group Addresses     doc_tap_

...

Group_add;

Switch to Group Addresses view and link BAOS data point to appropriate group:

doc_tap_addres_baos;

Repeat the steps 3. and 4. for all data points which you want to be communicated to TapHome.

doc_tap_step3_4;

5. Download   doc_tap_

...

Down;

Connect the KNX Gateway Board to the KNX bus and the PC to a KNX Interface. Press the Learn button on the KNX Gateway (green LED must light up). Select the device KNX BAOS 830 and use menu Download/Full download.

doc_tap_gate_board;