TapHome KNX Gateway uses a KNX component from Weinzierl called BAOS. The gateway is in ETS listed under the Weinzierl name. BAOS is KNX certified.

doc_tap_Knx_Gatew;

1.

...

 doc_tap_Prod_data;

Download product database from page https://www.weinzierl.de/images/download/development/830/Weinzierl_83x_KNX_BAOS_Module_ETS4.zip

...

For data point which are only written from TapHome select Communication, Read, Transmit options:

doc_tap_data_bod;

Image Modified

4. Configure Group Addresses     doc_tap_Group_add;

Switch to Group Addresses view and link BAOS data point to appropriate group:

doc_tap_addres_baos;

Repeat the steps 3. and 4. for all data points which you want to be communicated to TapHome.

doc_tap_step3_4;

5. Download   doc_tap_Down;

Connect the KNX Gateway Board to the KNX bus and the PC to a KNX Interface. Press the Learn button on the KNX Gateway (green LED must light up). Select the device KNX BAOS 830 and use menu Download/Full download.

doc_tap_gate_board;