1. Add KNX gateway to TapHome bus   doc_tap_1knx_gtw;

...

Opening Thermostat definition will show following data points:

doc_tap_op_therm;

If there is no humidity measurement include in device set this to 0 - Disabled

doc_tap_hum_meas;

4.2 Blind      doc_tap_42_bl;

Opening Blind definition will show following data points:

doc_tap_op_blind;

Image Modified

4.3 Push button      doc_tap_43_button;

Besides using classic push buttons, TapHome also works with design KNX push buttons.         

doc_tap_knx_pushb;

In the description below, the configuration enables all the precise control options as they are usual in TapHome:

• Light switching
• Scene sequencer
• Blinds control with different responses to short press and long press
• Continuous dimming while the push button is held

doc_tap_price_co;

Set Channel function to Dimming:            

doc_tap_set_ChFu;

Image Modified

Two data point types are generated - switching and dimming.

doc_tap_swit_dim;

Image Modified

Define 1 Bit data point type for Short press and 4 Bit data point type for Long press:

doc_tap_Short_long_p;

Image Modified

Image Modified

Create Group Addresses for both Short press and Long press and link the devices:

doc_tap_adresa;

Image Modified

Image Modified

In TapHome, map both Short press and Long press:

doc_tap_obidve;

Image Modified