...

doc_tap_mod3x;

doc_tap_Nastavenie;

1. Open Settings → Expose devices and select Add Interface. Select Modbus RTU, Modbus ASCII or Modbus TCP.
2. Define communication properties
   1. Modbus RTU or ASCII: Terminal (BUS 1, BUS 2 or BUS 3), Baud rate, Parity, Data bits, Stop bits
   2. Modbus TCP: TCP Port. (IP Address is set specifically for every device)
3. Add devices to be exposed
   Each device will show brief overview how to access them in 3rd party system

doc_tap_123_open_system;

doc_tap_exa_sw;

...