Page Comparison

In order to get notified when temperature exceeds certain value, or any other condition is met, use the setup scenario below.

doc_tap_notified;

Send notification when temperature exceeds 25 degrees

doc_tap_notification25deg;

Create virtual device (Menu → Settings → Virtual devices → + (or Add virtual device) → Switch

Set name "Notification"Set device type = Emergency:

doc_tap_Create_Emerg;
Setting Emergency device type will automatically pre-define correct icons and names for On and Off states:

doc_tap_SettingEmerg;

Open details of this new virtual switch and select Add a new smart rule

doc_tap_Opendetails;
Select smart rule Equation

doc_tap_ruleEquation;

Set smart rule Equation to turn on your virtual emergency switch if the notification condition is met.
In our example, we are checking if one of temperatures (Temperature 1, Temperature 2) is higher than 25ºC. Also, once this condition is met, we set minimum duration to 30 minutes, so that we don't receive notifications too often.

doc_tap_EquationOften;

...

doc_tap_Equation;	doc_tap_Ren1;
SETTINGS   INFO   LIMITING CONDITION
doc_tap_sett_cond1;
Variables Temperature 1 Temperature 2	doc_tap_VTT12;	Te = 21.8ºC Te1 = 22.3ºC
doc_tap_ VTT12;	Equation (Te > 25) or (Te1 > 25)	doc_tap_Equation;	Actions If result is TRUE, perform following actions: Notification	On EquationTe;
doc_tap_ActNotific;	doc_tap_ActOn; If result is FALSE, perform following actions: Notification
Off doc_tap_Falsenotif;	doc_tap_FalseOff; Duration When to stop performing specified actions Minimum durationValue: 30 minutes Maximum duration Value: not set
doc_tap_Duration30min;	doc_tap_(/); doc_tap_(X);

...

doc_tap_OpenNotif;
Set smart rule Notification to provide proper feedback when temperatures are higher than 25 degrees:

doc_tap_SetNotif;

There are more ways to setup push notifications:

...

...