...
doc_tap_Ppons;
doc_tap_defined_pipe;
Thermostat doc_tap_Thee | doc_tap_Thee; |
|---|---|
 |
doc_tap_BoilerABC;
| Boiler A | Boiler B | Boiler C |
|---|---|---|
 | | |
doc_tap_virtualAnalogOut;
...
| doc_tap_OvOoot; |
|---|
 |
doc_tap_BasicConf;
doc_tap_SmartRuleTempPID;
| doc_tap_InDe; | doc_tap_SmRu; | doc_tap_OuDe; |
|---|---|---|
| Thermostat | → PID Controller → P = 2 | Overall Output |
| doc_tap_The; | doc_tap_PID0; | doc_tap_OOu; |
doc_tap_Based_BoilerC;
...
| Output device • Boiler | doc_tap_1IDOO; | doc_tap_1SRE; | doc_tap_1ODB; | |
|---|---|---|---|---|
| <1% | -- | -- | doc_tap_01; | doc_tap_001; |
| >1%Equation: If Overall Output > 0.01 Minimum duration: 5min TRUE: Turn on Boiler AFALSE: Turn off Boiler A | doc_tap_1Eq001; | doc_tap_1TrFaBoA; | ||
| >45%Equation:If Overall Output > 0.45 Minimum duration: 5min | TRUE: Turn on Boiler B FALSE: Turn off Boiler B | doc_tap_1Eq045; | doc_tap_1TrFaBoB; | |
| >90%Equation: If Overall Output > 0.90 Minimum duration: 5minTRUE: Turn on Boiler C FALSE: Turn off Boiler C | doc_tap_1Eq090; | doc_tap_1TrFaBoC; |
doc_tap_CyclingBo;
doc_tap_boilersextracon;
doc_tap_BoilerPrior;
doc_tap_States_BoCAB;
doc_tap_SequencerABC;
...
| doc_tap_InnDe; | doc_tap_SmmRu; | doc_tap_OuuDe; | Virtual push button to start the sequencer | Sequencer(duration 18 hours) | Boiler Priority |
|---|---|---|---|---|---|
| doc_tap_Virtual_Push_butt; | doc_tap_SeqABC; doc_tap_Rotseq; | doc_tap_BoPri; |
doc_tap_smartrulesA;
...
| doc_tap_2IDOO; | doc_tap_2SRE; | doc_tap_2ODB; | doc_tap_2LCond; | |||
|---|---|---|---|---|---|---|
| <1% | -- | -- | doc_tap_02; | doc_tap_002; | ||
| >1%Equation: If Overall Output > 0.01 | TRUE: Turn on Boiler A FALSE: Turn off Boiler A | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority A | doc_tap_2Eq01; | doc_tap_2TrFaBoA; | doc_tap_2MultiPriorA; | |
| >45%Equation: If Overall Output > 0.45 | TRUE: Turn on Boiler B FALSE: Turn off Boiler B | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority A | doc_tap_2Eq45; | doc_tap_2TrFaBoB; | doc_tap_2MultiPriorAA; | |
| >90% | Equation: If Overall Output > 0.90 | TRUE: Turn on Boiler C | Type: Multi-Value SwitchSmart Rule will only work if... • Boiler Priority is set to Priority A | doc_tap_2Eq90; | doc_tap_2TrFaBoC; | doc_tap_2MultiPriorAAA; |
doc_tap_SimilarLimitingBC;
...
| doc_tap_3IDOO; | doc_tap_3SRE; | doc_tap_3ODB; | doc_tap_3LCond; | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| <1% | -- | -- | doc_tap_03; | doc_tap_003; | ||||||
| >1%Equation: If Overall Output > 0.01 | TRUE: Turn on Boiler B FALSE: Turn off Boiler B | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B | doc_tap_3Eq01; | doc_tap_3TrFaBoB; | doc_tap_3MultiPriorB; | |||||
| >45%Equation: If Overall Output > 0.45 | TRUE: Turn on Boiler C FALSE: Turn off Boiler C | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B | doc_tap_3Eq45; | doc_tap_3TrFaBoC; | doc_tap_3MultiPriorBB; | |||||
| >90% | Equation: If Overall Output > 0.90 | TRUE: Turn on Boiler A | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority B | doc_tap_3Eq90; | doc_tap_3TrFaBoA; | doc_tap_3MultiPriorBBB; | Input device • Overall Output | → Smart Rule → • Equation | Output device • Boiler | Limiting Condition
| doc_tap_4IDOO; | doc_tap_4SRE; | doc_tap_4ODB; | doc_tap_4LCond; | |||
|---|---|---|---|---|---|---|
| <1% | -- | -- | doc_tap_04; | doc_tap_004; | ||
| >1%Equation: If Overall Output > 0.01 | TRUE: Turn on Boiler C FALSE: Turn off Boiler C | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C | doc_tap_4Eq01; | doc_tap_4TrFaBoC; | doc_tap_4MultiPriorC; | |
| >45%Equation: If Overall Output > 0.45 | TRUE: Turn on Boiler A FALSE: Turn off Boiler A | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C | doc_tap_4Eq45; | doc_tap_4TrFaBoA; | doc_tap_4MultiPriorCC; | |
| >90% | Equation: If Overall Output > 0.90 | TRUE: Turn on Boiler B | Type: Multi-Value Switch Smart Rule will only work if... • Boiler Priority is set to Priority C | doc_tap_4Eq90; | doc_tap_4TrFaBoB; | doc_tap_4MultiPriorCCC; |