Step-by-step guide how to add KNX Gateway module in ETS.
1. Import Product Database
Download product database from page https://www.weinzierl.de/images/download/development/830/Weinzierl_83x_KNX_BAOS_Module_ETS4.zip
Open ETS project and in Catalog first import Weinzierl product database from downloaded archive.
2. Add BAOS module to your installation
Change to Topology view in ETS project:
From producer catalogue choose Weinzierl producer and find KNX BAOS 830 module. Insert module to appropriate area and line.
3. Configure BAOS Data Points
Select BAOS module and switch to it parameters. Choose first data point group 1-10, select data point 1 type.
The description text of the data point, which is only visible if you enabled a data point, is just a text field which is not downloaded into the KNX device. It stays in the ETS project just for information. It helps the commissioner to give a name to every data point.
This is list of all supported data point types with actually supported data points in TapHome:
doc_tap_Knx_Gatew;
1. doc_tap_Prod_data;
doc_tap_down_pag;
doc_tap_ets5;
2. doc_tap_BAOS;
doc_tap_topology;
doc_tap_prod_cataloq;
3. doc_tap_Conf_baos;
doc_tap_select_baos;
doc_tap_Data_Baos;
| Label in BAOS | Data point type |
|---|
| Used by TapHome virtual devices | Used by TapHome virtual variable | Comment | ||
|---|---|---|---|---|
| DPT 1 | 1 Bit, Boolean |
|  | |
| DPT 2 | 2 Bit, Control |
| | |
| DPT 3 | 4 Bit, Dimming, Blinds |
| | |
| DPT 4 | 8 Bit, Character Set |
| | |
| DPT 5 | 8 Bit, Unsigned Value |
| | |
| DPT 6 | 8 Bit, Signed Value |
| | |
| DPT 7 | 2 Byte, Unsigned Value |
| | |
| DPT 8 | 2 Byte, Signed Value |
| | |
| DPT 9 | 2 Byte, Float Value |
| | |
| DPT 10 | 3 Byte, Time |
|  | Implementing date and time from KNX into TapHome does not make sense. TapHome has its own internal date and time engine. |
| DPT 11 | 3 Byte, Date |
| | |
| DPT 12 | 4 Byte, Unsigned Value |
| | |
| DPT 13 | 4 Byte, Signed Value |
| | |
| DPT 14 | 4 Byte, Float Value |
| | |
| DPT 15 | 4 Byte, Access |
| | |
| DPT 16 | 14 Byte, String |
| | Planned feature, coming soon |
| DPT 17 | 1 Byte, Scene Number |
| | |
| DPT 18 | 1 Byte, Scene Control |
|
Switch to Group Objects, right click on data point and choose Properties. For data points which are used to communicate data to TapHome select Communication, Write, Transmit options:
...
|
doc_tap_Group_Object;
doc_tap_data_bod;
4.
...
Switch to Group Addresses view and link BAOS data point to appropriate group:
Repeat the steps 3. and 4. for all data points which you want to be communicated to TapHome.
5. Download
...
doc_tap_Group_add;
doc_tap_addres_baos;
doc_tap_step3_4;
5. doc_tap_Down;
doc_tap_gate_board;