doc_tap_Equithermic_mode;
| doc_tap_HeatM; | doc_tap_CoolllM; | |
|---|---|---|
| doc_tap_Inp; | doc_tap_OutTemp; | doc_tap_OutTemHu; |
| doc_tap_Ootp; | doc_tap_Setcirc; | doc_tap_Setvirtualcirc; |
| doc_tap_Lim; |
|
|
| doc_tap_PIDc; |  doc_tap_(X); | doc_tap_(XX); |
doc_tap_moreInnfo;
doc_tap_HowFinal;
doc_tap_EqCurveReturn;
doc_tap_Angleee;
doc_tap_FloorTableCurve;
| doc_tap_OuTem; | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| doc_tap_Angle; | -20ºC | -15ºC | -10ºC | -5ºC | 0ºC | 5ºC | 10ºC | 15ºC | 20ºC |
| 0.2 | 33 | 32 | 32 | 30 | 29 | 27 | 24 | 22 | 20 |
| 0.4 | 42 | 40 | 38 | 36 | 33 | 30 | 27 | 24 | 20 |
| 0.6 | 50 | 48 | 45 | 41 | 37 | 33 | 29 | 25 | 20 |
| 0.8 | 59 | 56 | 52 | 47 | 42 | 37 | 31 | 26 | 20 |
| 1.0 | 65 | 61 | 57 | 53 | 47 | 40 | 34 | 27 | 20 |
| 1.2 | 74 | 69 | 64 | 58 | 52 | 44 | 37 | 28 | 20 |
| 1.5 | 82 | 76 | 70 | 64 | 58 | 50 | 40 | 30 | 20 |
| 1.75 | 90 | 84 | 77 | 71 | 63 | 54 | 43 | 32 | 20 |
| 2.0 | 90 | 90 | 84 | 77 | 70 | 60 | 47 | 34 | 20 |
| 2.25 | 90 | 90 | 88 | 82 | 75 | 65 | 52 | 36 | 20 |
| 2.5 | 90 | 90 | 90 | 87 | 80 | 70 | 56 | 38 | 20 |
| 2.75 | 90 | 90 | 90 | 90 | 84 | 73 | 57 | 38 | 20 |
| 3.0 | 90 | 90 | 90 | 90 | 86 | 77 | 61 | 41 | 20 |
doc_tap_outdoor_37ºC;
doc_tap_Parallel_shift;
doc_tap_Increases_41ºC;
doc_tap_Adjustments_ther;
doc_tap_zone_term_ew;
| Heating mode | Cooling mode | |
|---|---|---|
| doc_tap_Heatmmm; | doc_tap_Coolm; | |
| Set point from zones | Equithermic curve will be shifted up if highest set point of zone thermostats is more than 22ºC | Equithermic curve will be shifted down if lowest set point of zone thermostats is less than 22ºC |
| doc_tap_fZones; | doc_tap_shiftup22; | doc_tap_shiftdown22; |
| Result | Resulting set point = Set point based on angle and parallel shift + Ratio * (highest zone setpoint - 22) | Resulting set point = Set point based on angle and parallel shift + Ratio * (lowest zone setpoint - 22) |
| doc_tap_Res; | doc_tap_setphig22; | doc_tap_setplow22; |
| Dew point limit | -- | Resulting set point can not be less than dew point temperature calculated from highest relative humidity in zones |
| doc_tap_Dewplim ; | doc_tap_n; | doc_tap_setpzones; |
Example scenario for zone hydronic heating with equitherm regulation
doc_tap_Ex_hyeating_eq;
Example scenario for zone hydronic cooling with equitherm regulation
doc_tap_Ex_cooling_eq;
