doc_tap_Knx_Gatew;
1. doc_tap_Prod_data;
doc_tap_down_pag;
doc_tap_ets5;
2. doc_tap_BAOS;
doc_tap_topology;
doc_tap_prod_cataloq;
3. doc_tap_Conf_baos;
doc_tap_select_baos;
doc_tap_Data_Baos;
| Label in BAOS | Data point type | Used by TapHome virtual devices | Used by TapHome virtual variable | Comment |
|---|---|---|---|---|
| DPT 1 | 1 Bit, Boolean |
|  | |
| DPT 2 | 2 Bit, Control |
| | |
| DPT 3 | 4 Bit, Dimming, Blinds |
| | |
| DPT 4 | 8 Bit, Character Set |
| | |
| DPT 5 | 8 Bit, Unsigned Value |
| | |
| DPT 6 | 8 Bit, Signed Value |
| | |
| DPT 7 | 2 Byte, Unsigned Value |
| | |
| DPT 8 | 2 Byte, Signed Value |
| | |
| DPT 9 | 2 Byte, Float Value |
| | |
| DPT 10 | 3 Byte, Time |
|  | Implementing date and time from KNX into TapHome does not make sense. TapHome has its own internal date and time engine. |
| DPT 11 | 3 Byte, Date |
| | |
| DPT 12 | 4 Byte, Unsigned Value |
| | |
| DPT 13 | 4 Byte, Signed Value |
| | |
| DPT 14 | 4 Byte, Float Value |
| | |
| DPT 15 | 4 Byte, Access |
| | |
| DPT 16 | 14 Byte, String |
| | Planned feature, coming soon |
| DPT 17 | 1 Byte, Scene Number |
| | |
| DPT 18 | 1 Byte, Scene Control |
| |
doc_tap_Group_Object;
doc_tap_data_bod;
4. doc_tap_Group_add;
doc_tap_addres_baos;
doc_tap_step3_4;
5. doc_tap_Down;
doc_tap_gate_board;