DC blinds, slides, awnings with Encoder signal

doc_tap_Number;

doc_tap_Number_impulses;

doc_tap_not;

doc_tap_Number_impulses;

doc_tap_not;

Calibration current
^{Limit of current during calibration.}

doc_tap_Calibration;

doc_tap_Limit_calibration; 

Normal operation current 
^{Limit of current during normal operation up.}

doc_tap_Normal;

doc_tap_Limit_operation;

Normal operation current down
^{Limit of current during normal operation down.}

doc_tap_Normal_down;

doc_tap_Limit_down;

Maximal current down change
^{Prevent reloading blind up in case when it is moving down. Stops blind moving down in case the current down is higher than average current down in defined percent.}

doc_tap_Maximal;

doc_tap_Prevent;

Impulses per second to regulate speed. 
^{Holds constant speed by using the number of impulses per second. If this is not possible to reach it holds higher possible or lower possible speed. To disable speed control set to 0.}

doc_tap_Impulses;

doc_tap_Holds;

Minimal PWM value. 
^{Set minimal PWM value to regulate blind speed or to use soft start and soft end.}

doc_tap_Minimal;

doc_tap_set;