Outputs
In order to configure outputs, go to Menu → Devices and select one of hardware modules with outputs. Set output configuration to Switch when this output is supposed to control On/Off valves, lights or any other switched devices. Scroll down for configuration of Blinds, mix valves or other AC electric motors.
Inputs
In order to configure inputs, go to Menu → Devices and select one hardware modules with inputs. Choose between Push button input (switches, blind controllers), Reed contact (motion sensors, window contacts), Impulse counter (electric meters, water meters), NTC input for temperature sensors.
Once inputs are configured, you can identify them by going to Menu → Devices and tap clock icon in top right corner. It is a feature called Monitor. When you press a light switch with a connected input, it will show up in the list on the screen. You can rename the input so that you can find it easily later.
Outputs and inputs which are Disabled don’t show up in Devices list in Menu.