230/110 VAC light e.g. a light bulb | 12/24 VDC Constant Voltage LED light e.g. a LED strip | DC Constant Current LED light e.g. a LED downlight | TapHome LED downlights | |
|---|---|---|---|---|
| 12 LED/OC Module | Not supported | Supported | Not supported | Supported |
| 8 Dim Module | Supported | Not supported | Not supported | Not supported |
| 8 Dim Module + 230VAC Dimmable Constant Current Driver | Not supported | Not supported | Supported | Supported |
| 4 AO Module + 230VAC Finder Universal Dimmer | Supported | Not supported | Not supported | Not supported |
| Core 2.x | Not supported | Supported | Not supported | Supported |
| 6 UI / 6 UC Bus Module | Not supported | Supported | Not supported | Supported |
| DMX Gateway + applicable driver | Supported | Supported | Supported | Not supported |
| DALI Gateway + light with DALI ballast | Supported | Supported | Supported | Not supported |
Modules with dimming feature allow adjustment of minimum and maximum values for dimming range. GUI of Dimmer/Analog output in TapHome application stays as it was (0% to 100%) but the device recalculates it to range defined in Service Settings.
12 LEDOC/OC, Core 2.x and 6 UI / 6 OC:
Open Service Settings of selected Dimmer and set MIN/MAX settings in %
8 DIM or AO4:
Open Service Settings of selected Dimmer and set MIN/MAX settings in Volts (decimal numbers supported)
