230/110 VAC light e.g. a light bulb | 12/24 VDC Constant Voltage LED light e.g. a LED strip | DC Constant Current LED light e.g. a LED downlight | TapHome LED downlights | |
|---|---|---|---|---|
| doc_tap_230bulb; | doc_tap_LEDstrip; | doc_tap_DCLEDdownl; | doc_tap_LEDdown; | |
| 12 LED/OC Module | Not supported | Supported | Not supported | Supported |
| doc_tap_1Notsup; | doc_tap_2Sup; | doc_tap_3Notsup; | doc_tap_4Sup; | |
| 8 Dim Module | Supported | Not supported | Not supported | Not supported |
| doc_tap_1Sup; | doc_tap_2Notsup1; | doc_tap_3Notsup1; | doc_tap_4Notsup1; | |
| 8 Dim Module + 230VAC Dimmable Constant Current Driver | Not supported | Not supported | Supported | Supported |
| doc_tap_1Notsup1; | doc_tap_1Notsup2; | doc_tap_3Sup1; | doc_tap_4Sup1; | |
| 4 AO Module + 230VAC Finder Universal Dimmer | Supported | Not supported | Not supported | Not supported |
| doc_tap_1Sup1; | doc_tap_1Notsup3; | doc_tap_3Notsup2; | doc_tap_4Notsup2; | |
| Core 2.x | Not supported | Supported | Not supported | Supported |
| doc_tap_1Notsup2; | doc_tap_2Sup2; | doc_tap_3Notsup3; | doc_tap_4Sup2; | |
| 6 UI / 6 UC Bus Module | Not supported | Supported | Not supported | Supported |
| doc_tap_1Notsup3; | doc_tap_2Sup3; | doc_tap_3Notsup4; | doc_tap_4Sup3; | |
| DMX Gateway + applicable driver | Supported | Supported | Supported | Not supported |
| doc_tap_1Sup2; | doc_tap_2Sup4; | doc_tap_3Sup2; | doc_tap_4Notsup3; | |
| DALI Gateway + light with DALI ballast | Supported | Supported | Supported | Not supported |
| doc_tap_1Sup3; | doc_tap_2Sup5; | doc_tap_3Sup3; | doc_tap_4Notsup4; |
Modules with dimming feature allow adjustment of minimum and maximum values for dimming range. GUI of Dimmer/Analog output in TapHome application stays as it was (0% to 100%) but the device recalculates it to range defined in Service Settings.
doc_tap_modGUI;
12 LEDOC/OC, Core 2.x and 6 UI / 6 OC:
doc_tap_12led6oc;
Open Service Settings of selected Dimmer and set MIN/MAX settings in %
doc_tap_OpenMinMax;
8 DIM or AO4:
doc_tap_8dimAO4;
Open Service Settings of selected Dimmer and set MIN/MAX settings in Volts (decimal numbers supported)
doc_tap_openMinMaxVolts;
