Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Step-by-step guide how to add KNX Gateway module in ETS.

1. Import Product Database

Download product database from page https://www.weinzierl.de/images/download/development/830/Weinzierl_83x_KNX_BAOS_Module_ETS4.zip

Open ETS project and in Catalog first import Weinzierl product database from downloaded archive.

2. Add BAOS module to your installation

Change to Topology view in ETS project:

From producer catalogue choose Weinzierl producer and find KNX BAOS 830 module. Insert module to appropriate area and line.

3. Configure BAOS Data Points

Select BAOS module and switch to it parameters. Choose first data point group 1-10, select data point 1 type. 

The description text of the data point, which is only visible if you enabled a data point, is just a text field which is not downloaded into the KNX device. It stays in the ETS project just for information. It helps the commissioner to give a name to every data point.

This is list of all supported data point types with actually supported data points in TapHome:

Label in BAOSData point typeAvailable from TapHome app
DPT 11 Bit, Boolean(/)
DPT 22 Bit, Control(x)
DPT 34 Bit, Dimming, Blinds(x)
DPT 48 Bit, Character Set(/)
DPT 58 Bit, Unsigned Value(/)
DPT 68 Bit, Signed Value(/)
DPT 72 Byte, Unsigned Value(/)
DPT 82 Byte, Signed Value(/)
DPT 92 Byte, Float Value(/)
DPT 103 Byte, Time(x)
DPT 113 Byte, Date(x)
DPT 124 Byte, Unsigned Value(/)
DPT 134 Byte, Signed Value(/)
DPT 144 Byte, Float Value(/)
DPT 154 Byte, Access(x)
DPT 1614 Byte, String(x)
DPT 171 Byte, Scene Number(x)
DPT 181 Byte, Scene Control(x)


Switch to Group Objects, right click on data point and choose Properties. For data points which are used to communicate data to TapHome select Communication, Write, Transmit options:

For data point which are only written from TapHome select Communication, Read, Transmit options:

4. Configure Group Addresses 

Switch to Group Addresses view and link BAOS data point to appropriate group:

Repeat the steps 3. and 4. for all data points which you want to be communicated to TapHome.

5. Download

Connect the KNX Gateway Board to the KNX bus and the PC to a KNX Interface. Press the Learn button on the KNX Gateway (green LED must light up). Select the device KNX BAOS 830 and use menu Download/Full download.





  • No labels