Firmware | Description |
---|
doc_tap_Fwe; | doc_tap_popis; |
---|
34 | Corrected error handling in Ble14. Corrected incorrect DO index handling in KNX Gateway.Added blinds flag for choosing between 20% and 100% when calibrate to border.34 | doc_tap_34; |
33 | Corrected I2C communication and CO2 averaging in STM32L modules. Added support for NTC calibration - STM32L modules.33 | doc_tap_33; |
32Fixed generation of serial numbers of 6UI 6UO rev 1.0, 2UI rev 1.0, 12DO rev 2.0, 12LED/OC rev 2.0 and 14BLe rev 2.3 modules | doc_tap_32; |
31Fixed scan of 6UI 6UO rev 1.0, 2UI rev 1.0, 12DO rev 2.0 modules - problem with generator of random numbers | doc_tap_31; |
30Fixed initialization of power limited output | doc_tap_30; |
29Flush mount modules - fixed handling of erased EEPROMBlinds - improved handling of actions that set similar position and angle | doc_tap_29; |
28 | - Added support for synchronized transactions (actions from 1 smart rule are performed at exactly the same time on all affected devices)
| doc_tap_28; |
27Safe values when module is not communicating with Core | doc_tap_27; |
26Modules with EXT sensors are not being restarted during scan requestUI24 changed analog comparator value for digital input (0-7V / 8-24V) | doc_tap_26; |
25Significantly lowered power consumption for modules 2NTC4DI, 2NTC2DI2DO, Core14Optimised power consumption for all modules on XMEGA architectureCorrected blind angle change when 100% reached and different time defined for up/down movement | doc_tap_25; |
24 | - Fix of displayed CPU temperature
| doc_tap_24; |
23No unnecessary motion of blinds when desired position is reachedFixed EEPROM update - works differently as read/writeImproved CO2 value filtering | doc_tap_23; |
22 | - Fixed speed of wind sensor (approx. 2x increase in wind speed!!!), improved reporting of windspeed
| doc_tap_22; |
21Wind and Brightness sensor memory fix | doc_tap_21; |
20Reverse direction setting for encoder blindsFaster scan of new TapHome Bus modulesMulti-zone controller showing "configuration in progress" | doc_tap_20; |