Skip to end of metadata
Go to start of metadata
Firmware | Description |
---|
doc_tap_Fwe; | doc_tap_popis; |
34 | - Corrected error handling in Ble14. Corrected incorrect DO index handling in KNX Gateway.
- Added blinds flag for choosing between 20% and 100% when calibrate to border.
|
| doc_tap_34; |
33 | - Corrected I2C communication and CO2 averaging in STM32L modules. Added support for NTC calibration - STM32L modules.
|
| doc_tap_33; |
32 | - Fixed generation of serial numbers of 6UI 6UO rev 1.0, 2UI rev 1.0, 12DO rev 2.0, 12LED/OC rev 2.0 and 14BLe rev 2.3 modules
|
| doc_tap_32; |
31 | - Fixed scan of 6UI 6UO rev 1.0, 2UI rev 1.0, 12DO rev 2.0 modules - problem with generator of random numbers
|
| doc_tap_31; |
30 | - Fixed initialization of power limited output
|
| doc_tap_30; |
29 | - Flush mount modules - fixed handling of erased EEPROM
- Blinds - improved handling of actions that set similar position and angle
|
| doc_tap_29; |
28 | - Added support for synchronized transactions (actions from 1 smart rule are performed at exactly the same time on all affected devices)
|
| doc_tap_28; |
27 | - Safe values when module is not communicating with Core
|
| doc_tap_27; |
26 | - Modules with EXT sensors are not being restarted during scan request
- UI24 changed analog comparator value for digital input (0-7V / 8-24V)
|
| doc_tap_26; |
25 | - Significantly lowered power consumption for modules 2NTC4DI, 2NTC2DI2DO, Core14
- Optimised power consumption for all modules on XMEGA architecture
- Corrected blind angle change when 100% reached and different time defined for up/down movement
|
| doc_tap_25; |
24 | - Fix of displayed CPU temperature
|
| doc_tap_24; |
23 | - No unnecessary motion of blinds when desired position is reached
- Fixed EEPROM update - works differently as read/write
- Improved CO2 value filtering
|
| doc_tap_23; |
22 | - Fixed speed of wind sensor (approx. 2x increase in wind speed!!!), improved reporting of windspeed
|
| doc_tap_22; |
21 | - Wind and Brightness sensor memory fix
|
| doc_tap_21; |
20 | - Reverse direction setting for encoder blinds
- Faster scan of new TapHome Bus modules
- Multi-zone controller showing "configuration in progress"
|
| doc_tap_20; |